The body of the teapot is in the form of a polyhedron expanding upward. In the upper and lower parts of the wall there is a belt with concentric lines engraved by hand. On the front side there is a rectangular overlay-base-plate with a plant ornament engraved by hand. The cover is dome-shaped, stepped, smooth. The handle is cast, with three ring-shaped protrusions. The handle is composed of curved shaped rods connected by a grip in the shape of a narrow cylinder. Attached to the cover with a flat lining and rivets. The nose is bent up. A stand in the form of a faceted cylinder on three tall curly legs connected to each other at the bottom by flat decorated rods. The base of the legs is flat, in the shape of a trefoil. The legs are attached to the body using narrow rectangular overlays and pair rivets. On the stand, on all three sides, there are circular openings decorated with flat base plates with an engraved floral ornament. The lower part of the stand is decorated with a strip of slotted ornament. On both sides of the stand with the help of hinges attached hanging ring-shaped handles. A cylindrical galvanized sheet insert is inserted into the chimney. On the top of the insert there are three holders for the teapot in the form of flat rectangular plates.
teapot – 36 × 37 × 22 cm.
stand – 70 × 38 × 35 cm.